EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Cost Controller is usually a hugely effective photo voltaic controller suitable for off-grid photo voltaic units. According to multiphase synchronous rectification technological know-how, it makes sure optimized energy conversion and method balance for a variety of photovoltaic (PV) programs.
Essential Options from the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Demand Controller engineering for remarkable photo voltaic Electricity harvesting. Critical options involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery daily life.
LCD Show with actual-time info monitoring.
Several Load Management Modes which include guide and timer.
Extensive Electronic Protections towards overcharging, above-discharging, brief circuits, and reverse polarity.
Step-by-Step Guide to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Make certain all elements are integrated: Tracer AN unit, temperature sensor, interaction cables, and consumer guide.
Confirm the model variety and voltage rankings match your photo voltaic panel and battery technical specs.
two. Mounting the Charge Controller
Find a perfectly-ventilated, dry site near to the battery bank.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Normally observe appropriate safety protocols and make sure the process is run off prior to connecting factors.
Action 1: Hook up the battery terminals on the charge controller (positive to favourable, adverse to unfavorable).
Move two: Link the photo voltaic panel array on the PV input terminals.
Move three: Connect the load terminals if employing a immediate load connection.
Move 4: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Settings
Electricity within the controller by connecting the battery 1st.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Kind: AGM, GEL, More info Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Guide, timer, light Regulate.
5. Monitoring and Knowledge Logging
The Tracer AN Sequence supports actual-time checking utilizing the MT50 remote meter.
Details is often logged through the RS485 communication port applying application like Photo voltaic Station Computer.
Distant monitoring is achievable Together with the EPEVER WiFi module.
six. Troubleshooting Widespread Issues
Challenge 1: No Electric power Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Defense
Verify the photo voltaic array’s voltage rating.
Change method parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology makes sure:
Larger Performance: Reduced Electricity losses throughout conversion.
Improved Dependability: Secure overall performance underneath variable loads.
For a longer time Battery Everyday living: Steady and precise charging profiles.
Summary
The EPEVER Solar Charge Controller with multiphase synchronous rectification technological know-how is surely an Excellent option for optimizing solar energy era and increasing battery everyday living. By adhering to the above mentioned setup guidebook, people can ensure greatest performance and system longevity.